ColorBack Sealer - 5Gal

FLORIDA FORMULATED • XYLENE BASED • NON-YELLOWING • SEMI-WETLOOK • ENHANCE COLOR

COLORBACK is a clear sealer designed for today's interlocking brick pavers, and concrete curing. COLORBACK is a high quality solvent acrylic (xylene based acrylic), non-yellowing coating that gives a semi-wet look and brings back old faded pavers by enhancing the true color.

ColorBack Sealer will protect against ultraviolet fading, mildew formation, surface degradation and efflorescence whitening.  It provides a brilliant sheen and a richness of color unmatched by any other paver sealer on the market. Non-skid additives may be added to COLORBACK SEALER for slip resistant.

• Pavers must be clean, dry and free of any dirt, stains, and failed sealer.
• Stir sealer from the bottom up in order to get a uniform consistency. DO NOT THIN MATERIAL.
• Brush, roll or spray. Apply COLORBACK evenly and do not leave puddles or roller marks.
• Use new roller frame and grid (free from old paint or sealer).
• Use a 3/4" nap for most types of pavers.
• One coat is recommended (applying too many coats will result in a very slippery surface and could cause blushing).

• Surface will be tack free in 1 to 2 hours. Light foot traffic in 4 to 6 hours. Vehicle traffic in 48 hours.
• Clean up all tools with xylene, xylol, or lacquer thinner. DO NOT THIN MATERIAL.
• Do not apply to damp or wet pavers.
• WARNING. Whenever a surface is coated it may become slippery. Non-skid additives may be incorporated to help this from happening. It is sole responsibility of the applicator to determine whether non-skid additives should be used.
• CAUTION. Keep out of reach of children. Do not take internally. If swallowed, contact physician immediately. Close container after each use.