ColorBack Semi-Gloss Oil Based Paver Sealer - Acrylux
- DESCRIPTION
- DETAILS
- PATTERNS
- ATTACHMENTS
- REVIEWS
- Q&A
- RELATED PRODUCTS
FLORIDA FORMULATED • XYLENE BASED • NON-YELLOWING • SEMI-WETLOOK • ENHANCE COLOR
XYLENE BASED • SEMI-WETLOOK • ENHANCE COLOR
When looking for a high-quality paver sealer in South Florida, Colorback is a great choice. COLORBACK is a clear sealer designed for today's interlocking brick pavers, and concrete curing. COLORBACK is a high quality solvent acrylic (xylene based acrylic), non-yellowing coating that gives a semi-wet look and brings back old faded pavers by enhancing the true color. As an oil-based paver sealer, Colorback offers exceptional durability and a long-lasting finish. Designed specifically for concrete and natural stone paver driveways, walkways, pool decks, and patio decks.
ColorBack Sealer will protect against ultraviolet fading, mildew formation, surface degradation and efflorescence whitening. It provides a brilliant sheen and a richness of color unmatched by any other paver sealer on the market. Non-skid additives may be added to COLORBACK SEALER for slip resistant.
ColorBack Paver Sealer It provides unmatched protection against ultraviolet fading, mildew formation, surface degradation, and efflorescence whitening. What sets Colorback apart is its ability to deliver a brilliant sheen and a richness of color that surpasses other oil-based paver sealers on the market. For added safety, non-skid additives can be included to enhance slip resistance. When it comes to paver sealers in South Florida, choose Colorback for outstanding performance and breathtaking results.
Application & Instruction :
- Pavers must be clean, dry and free of any dirt, stains, and failed sealer.
- Stir sealer from the bottom up in order to get a uniform consistency. DO NOT THIN MATERIAL.
- Brush, roll or spray. Apply COLORBACK evenly and do not leave puddles or roller marks.
- Use new roller frame and grid (free from old paint or sealer).
- Use a 3/4" nap for most types of pavers.
- One coat is recommended (applying too many coats will result in a very slippery surface and could cause blushing).
Please Note :
- Surface will be tack free in 1 to 2 hours. Light foot traffic in 4 to 6 hours. Vehicle traffic in 48 hours.
- Clean up all tools with xylene, xylol, or lacquer thinner. DO NOT THIN MATERIAL.
- Do not apply to damp or wet pavers.
- WARNING. Whenever a surface is coated it may become slippery. Non-skid additives may be incorporated to help this from happening. It is sole responsibility of the applicator to determine whether non-skid additives should be used.
- CAUTION. Keep out of reach of children. Do not take internally. If swallowed, contact physician immediately. Close container after each use.
You May Also Like :
Recommended Alternatives :
Colorback
High-GlossBrand Acrylux Specifications TECHNICAL INFORMATION :
COLORBACK SEMI-GLOSS PAVER SEALER PRODUCT
NUMBERSCB1 CB5 DESCRIPTION A protective clear coat and curing compound for concrete brick pavers. SUGGESTED
USESA semi-gloss finish coat for concrete brick pavers. ADDITIONAL
USESConcrete curing compound, concrete chatahoochee. COLOR Clear FINISH: Semi-Gloss VEHICLE
TYPESolvent acrylic SOLVENT
TYPEXylene VOC 692 gm/l FLASH POINT 81°F SOLIDS
BY VOLUME, %:25.5 % SOLIDS
BY WEIGHT, %:29.84 % WEIGHT
PER GALLON7.74 lbs RECOMMENDED
DRY TIMEAt 70°F and 50% relative humidity: Touch – 1 hour (depending on weather). Recoat – 2 hours. Surface will be tack free in 1 hour, ready for foot traffic in 2 hours and vehicle traffic in 72 hours. Dry times may vary depending on air temperature, wind, and humidity. LIMITATIONS CAUTION: DO NOT apply in temperatures below 50°F. DO NOT apply to a damp surface. On excessively hot surfaces, for example direct sunlight on a hot day, drying may occur too rapidly, causing trapped vapors to bubble. If this occurs we recommend application during a cooler time of day. SURFACE
PREPARATIONPavers must be clean, dry and free of any dirt, stains, and failed sealer. On bare concrete, the surface must be clean and dry. MIXING Stir from bottom with vigorous strokes. Do not add oil or other paints. DO NOT add Xylene or other solvents. DO NOT thin. APPLICATION Brush, Roller ( min 3/8” nap ), or airless spray. DO NOT APPLY excessive pressure on the roller, roll with light to medium pressure. Apply paver sealer evenly and do not leave puddles or roller marks. Only one coat is required. Do not apply to areas where standing water is evident. Where there is a possibility of slipperiness – DO NOT APPLY THIS PRODUCT. If there has been a skid texture added to the base coat this product may perform properly but all precautions must be taken. SHELF
LIFE2 years PACKAGING 1 gallon 5 gallons *This estimated value may have changed. Please contact us for further update details SURFACE TYPE :
- Concrete brick pavers
- Concrete curing compound
- Concrete chatahoochee
COVERAGE :
- Coverage will depend on surface texture and porosity.
- Coverage averages on porous surfaces: Rolling - 200 sq. ft per gallon. Spraying – 300 sq. ft. per gallon.
- Average coverage will be 150 - 200 sq.ft. per gallon
