LuxStone Natural Stone Sealer - 5Gal

MATTE FINISH • NATURAL LOOK • WATER BASED • MILDEW RESISTANT

Acrylux LuxStone is a water based natural finish sealer that helps protect porous natural stone pavers. LuxStone will provide resistance to mildew, water damage, dusting and staining. It dries clear and cleans up with water.

Luxstone provides resistance to staining, mildew, water damage and whitening. An unsealed natural stone surface will quickly absorb spills like red wine, salad dressing, olive oil and lotions. Luxstone will keep liquids from penetrating and permanently staining your deck surface. Additionally, Luxstone will resist mildew stains and provide protection from pool chemicals and lawn care chemicals. Your natural stone deck is not complete without Luxstone protection.

LuxStone can be applied to all porous interior and exterior natural stones surface. LuxStone can be used on driveways, patios, walkways, pool decks and other porous stone applications. Apply to surface that are unsealed, clean, sound and penetrable.

• LuxStone is ready to use. One or two coats are required at 200 - 400 square feet per gallon per coat.
• Apply using a medium 3/8" nap roller, spray applications require a low pressure garden type sprayer or an airless paint strayer using minimum .015 tip.
• Ambient temperatures should be at least 50F and below 100F.
• Back roll or mop up puddles / runs as they occur.

• Do not pour product onto horizontal surfaces to spread.
• On vertical surfaces start at the top and work down the wall with overlapping strokes.
• LuxStone appears translucent and dries completely clear. After application, water should bead or sheet off the surface, if not, an additional coat may be required. Allow coating to dry (enough to be walked on) 1-2 hours between coats.
• Stagger or roll opposite across the first coat so that overlaps do not align.
• A full cure takes 72 to 168 hours.
• Heavy traffic on coated surface should be avoided during this curing period.

• Clean brushes, rollers, sprayer and other equipment with water.
• Do not use on glazed, polished, honed or non-porous surfaces.
• Application of LuxStone may slightly affect the color and sheen of the surface.
• A mock test in an inconspicuous area should always be performed to insure that desired results are achieved.
• WARNING. Wear eye protection. In case of eye contact, flush eyes with plenty of clean water for at least 15 minutes. Do not take internally. If swallowed contact a physician or Poison Control Center. Do not breathe vapors. Ensure good cross ventilation during application and drying. Was thoroughly after handling. Keep container closed when not in use.
• WARNING. Whenever a surface is coated it may become slippery. Non-skid additives may be incorporated to help this from happening. It is sole responsibility of the applicator to determine whether non-skid additives should be used.
• CAUTION. Keep out of reach of children. Do not take internally. If swallowed, contact physician immediately. Close container after each use.