NOCO Storm Jointing Compound - Techniseal

NOCOSTORM™ is a multi-weather permeable jointing compound that installs easily in a wide range of weather conditions, including wet pavers with continuous water exposure. Techniseal's latest jointing product allows hardscapers to minimize delays in completing residential paver installations.

Don't let the rain prevent you from finishing your job; use NOCOSTORM™. NOCOSTORM™ jointing compound installs over wet pavers with continuous water exposure. With this new compound, Techniseal offers the most complete jointing product range for pavers on the market. Challenge mother nature; work in the wet or dry weather conditions with 3 easy steps.

• Pre-Soak
• Pour
• Spread & Water

Perfect for draining base and cement/sand bedding projects, NOCOSTORM™ is suited for walkways, pool decks, patios, and other non-vehicular areas. NOCOSTORM™ is ideal for installation with the EZ BASE foam panel system. It is a highly reliable solution for the durable jointing of natural stones, concrete and clay pavers, large slabs, and outdoor porcelain.

• Natural stones, wet cast pavers, concrete pavers, highly textured surfaces and large slabs.
• Natural stone, concrete pavers, wet-cast pavers, clay pavers, large slabs and porcelain
• For all types of installations including draining base, cement/sand bedding*
  *A porous, draining base such as sand or chip setting bed (ASTM #9) is required for proper installation.
• Ideal for walkways, pool decks, patios and non-vehicular areas
• Ideal for installation with EZ Base foam panels
• Joint width from 1/8" to 2" with intersecting spaces up to 4”
• Minimum joint depth: 1"

• For sensitive, highly-textured or absorbent paving materials, user should assess the sensitivy of the material first and ensure that the jointing compound is suitable to be used.
• NOCO-Storm provides a permeable joint. Ensure that it is used on a free draining installation and that water is not retained for extended period of time. Do not use NOCO-Storm if conditions are not suitable. Product needs to dry out initially and dry again following exposures to water (rain, cleaning).
• Temperature must be above 37°F (3°C). Freezing conditions following application will extend product set time.
• NOCOSTORM™ permeable jointing compound is used to fill the joints and does not provide structural integrity to the installation. It should only be used on a stable base with proper drainage. The bedding material must provide a stable surface in order for NOCOSTORM™ to be used succesfully.
• Traffic: Pedestrian: 24 h / Vehicular: not recommended. Block access during that period.
• Product must be tested on a small area to insure that texture and color meet expectations.
• Wear appropriate safety gears.
• Do not mix product with cement, sand or any other material.
• Wait for a minimum of 30 days after installation and ensure that joint has hardened before cleaning and sealing the surface. Depending on type of sealant used, joint porosity may be affected.
• Do not use on submerged or constantly wet surfaces.
• Because product comes from a natural source, color and grain size may vary. The color shown on the container is for indication only. Joint color may also change under weathering and exposure to elements.
• Do not use this product as a capping product. Empty the joints first in order to meet the minimum joint width and depth requirements.
• Because product comes from a natural source, color and grain size may vary.
• Only open vacuum-sealed bag when you are ready to start the application.