StickyStone Hardscape Adhesive Sausages (20oz) - Techniseal

Specially developed for vertical applications, STICKYSTONE™ is a versatile quick-tack adhesive that bonds to manufactured stone, natural stone, outdoor porcelain tile, and various other construction substrates.

Ideal for above-grade, vertical veneering installations, STICKYSTONE™ Sausages offers superior initial green strength. Application is fast and easy whether you're using the specially designed STICKYSTONE™ Sausage Applicator Gun or any other equivalent dispensing device.

Vertical veneering installations with STICKYSTONE™ are up to 50% faster than with traditional mortar. This professional-grade adhesive also allows for easier, quicker, and cleaner jobs.

STICKYSTONE™ bonds to a wide range of substrates, including, but not limited to:

• Gypsum board / Drywall
• Wood
• Pressure-treated wood
• Plywood
• Brick
• Concrete block
• Cement board

• Ideal for above-grade, vertical veneering applications
• Indoor & outdoor applications
• Hardscape applications such as: outdoor kitchens, fireplaces, firepits, columns, mailboxes, doghouses, etc.
• Veneer materials include: manufactured stone, decorative stone, alternative masonry, natural stone, outdoor porcelain tile, outdoor glass, wood, composite materials, concrete pavers and a variety of substrates.
• Subtrates include, but are not limited to: gypsum board/drywall, wood, pressure-treated wood, plywood, brick, concrete block, cement board.
• Cut the tip of the applicator gun to the desired bead size.
• Remove clip to open foil, then position roll in sausage gun.
• Apply a bead of adhesive to one side of the substrate being bonded, ensuring that the quantity is sufficient for your application. For large areas, apply parallel beads approximately 3" (75 mm) apart to allow an aerated gap between the beads.
• STICKYSTONE™ is a moisture-curing adhesive. Therefore, it requires one surface to be porous to allow moisture to penetrate. Avoid adhesive patterns that would prevent contact with air moisture.
• In reference to the final installation, ensure that adhesive beads are oriented in a vertical way.
• For material heavier than 15 lb/sq. ft., apply additional beads of adhesive.
• Allow the bottom leveling row of material to cure for 15 minutes before installing additional rows to provide support for the rows above.
• Apply in temperatures above 32°F (0°C) to ensure proper curing.
• Immediately join the components together to bond.
• Working strength will typically form after 10 minutes.

• Dry-fit materials to ensure proper fit before applying adhesive.
• Surfaces must be clean, dry, and free of frost, grease and contaminants.
• Roughen non-porous surfaces for optimal adhesion.
• StickyStone™ typically adheres to common construction substrates without primer. However, Techniseal always recommends that a mock-up or field adhesion test be performed on the actual materials being used on the installation to verify the need for a primer. If needed, please contact Techniseal Technical Service.
• Adhere to a small sample of materials to ensure a strong hold.
• Wear appropriate safety gears.
• Protect surrounding area from excess adhesive.
• Do not use on submerged or constantly wet surfaces.
• Not suitable for bonding polyethylene, polypropylene, Teflon® or nylon substrates. Do not use as a structural glazing adhesive, or for bonding plastics that are sensitive to stress cracking. Not recommended for prolonged exposure to water. Contact with bituminous or tar containing surfaces may lead to discoloration. Test on natural stone to ensure no discoloration.
• Do not use for structural applications.
• Do not use for masonry structures or if attached to a structure mandated by code.
• Product should be installed in accordance with the provisions of local building code. Always follow industry best practices appropriate for the application.
• CAUSES BURNS. CAUSES EYE BURNS. HARMFUL IF INHALED. CAUSES RESPIRATORY TRACT AND SKIN IRRITATION. SUSPECT CANCER HAZARD - MAY CAUSE CANCER.
• KEEP OUT OF THE REACH OF CHILDREN.